|
ChurchRite
products are
sold by a Dealer Network .
Become a Dealer for ChurchRite! Get Started Today!
Free
Information
Did You
Know?...
If you
baptistry holds less than 150 gallons of water, a Portable Baptistry Heater
is best. If you hold up to 600 gallons, a 5-6 KW heater will be
required. If you have a larger pool, with select 2 of the 6 KW heaters
or use one 11 KW heater.
|
SAVE
ELECTRICITY!
Our New
Poolside Baptistry Heater allows for water circulation
as the water is heated, and uses 30% LESS
ELECTRICITY than traditional heaters!
Learn
More |
IMPORTANT
REMINDER!
Reminder, all heaters are
electrical products and should only be installed by a licensed
electrician.
CAUTION!
All Heater
Products must be protected by a GFCI Breaker before you use
them! This simple procedure will protect your Pastor and
Candidates during the Service! Make
sure your electrician installs a GFCI breaker. Some of
our heaters have one already installed.
|
ChurchRite®
- All Our Heaters are on this page!
To order
any product, visit a
ChurchRite dealer.
1. Immersion
Heater #10
Immersion Baptistry Heaters #10 -
Non-Adjustable Immersion Heaters are well suited for
installations where it is difficult to provide plumbing to and
from the baptistry. At the right is the #10 immersion water heater,
suitable for heating portable pools up to 150 gallons only.
Operating on 115v (standard household current), the heater has a
15' power cord with a built in GFCI plug.
Additional Info.
2. Immersion
Heater IMER120V (1.5 KW) or
IMER 240V (6 KW)
The IMER 120V or 240V heaters are the other choice in
immersion style baptistry heater technology. Designed to
heat either a portable baptistry (120V) or full size baptistry
(240V) these units have been used by churches for over 30 years!
This design is very simple to use, just plug the heater into a
GFI protected outlet, put into the water, and turn the
adjustable thermostat knob until the light comes on.
Additional Info
GFCI Recommended
3. Poolside
Heater PL 120V or PL 240V
The Poolside
Series heaters are Energy Saver models (240V use 30% less
energy!). Very simple to use, you place the submersible
pump into your church pool, attach a hose to the pump and the
heater, then attach the second hose at the heater and drop the
other end into the water. Plug in and turn on! The
120V has a built in GFCI.
Additional
info.
GFCI Recommended for
PL240
4 . Basic
Circulation Heater 6 KW or 11.5 KW
The Basic
Circulation Water heater has been the staple of the baptistry
heater industry for over 50 years. This model has been a
proven, effective workhorse for generations. Available in
either a 6 KW or 11.5 KW version, it attaches to the side of
your baptistry (plumbing fixtures included) and water is pumped
in from the bottom, over the heating element, and out the top.
There is an adjustable thermostat and a light to let you know
the unit is working.
Additional Info
GFCI Recommended
5. Deluxe
Circulation Heater 5.5 KW or 11.5 KW
Our Deluxe
Circulation system offers the best possible system for all full
size baptistries! The element chamber is made from
stainless steel (no rust), it has a powerful pump to push the
water, so you can actually set up this unit as far as 15' from
your baptistry. A number of accessories are available to
make this a fully automatic system!
Additional Info
GFCI Included!
To order,
visit a
ChurchRite dealer.
ChurchRite offers several styles of baptistry heaters,
including:
In addition, we
have
Baptistry Accessories available, including Handrails, Drain
and Overflow Kits, Fill Faucets, Skimmer Filters, GFCI Breakers
and Receptacles for our heaters.
See Our Products Page!
|
