ChurchRite® - Our Immersion Baptistry Heater Products 

 1.  Immersion Baptistry Heaters #10 -

Non-Adjustable Immersion Heaters are well suited for installations where it is difficult to provide plumbing to and from the baptistry.  We offer two styles of immersion heaters.  At the right is the #10 immersion water heater, suitable for heating portable pools up to 150 gallons only.  Operating on 115v (standard household current), the heater has a 15' power cord with a built in GFCI plug.. Designed for safe, easy use, the #10 baptistry heater features a ceramic heating element, preset thermostat at 90 F, and silicone bumpers so you can lay it down in the portable baptistry. This is an Energy Efficient model, using 1/3 the power of other models. It will take 12-24 hours* to heat a portable baptistry. Technical Info.  To order, visit a ChurchRite dealer.        GFCI Included.    Instructions

The IMER 120V or 240V heaters are the other choice in immersion style baptistry heater technology.  Designed to heat either a portable baptistry (120V) or full size baptistry (240V) these units have been used by churches for over 30 years!  This design is very simple to use, just plug the heater into a GFI protected outlet, put into the water, and turn the thermostat knob until the light comes on. (Be sure heater is in the water before turning on!) The 120V heater will raise the water temperature to a suitable range in 12-24 hours*, and the 240V unit will raise an average baptistry (500 gallons) in 6-8 hours*.   Technical Info.  To order, visit a ChurchRite dealer.  GFCI Recommended

*Exact temperature increase times cannot be given because there are other factors that affect this, such as the initial water temperature, room ambient temperature, and whether you have a baptistry cover on or not.