HomeTechnical DealersBecome a Dealer |  Warranty RegistrationProducts | Contact

Email

ChurchRite products are sold by a Dealer Network .

 

Become a Dealer for ChurchRite! Get Started Today!
Free
Information


 

 

 

ChurchRite offers several styles of baptistry  heaters, including:

Portable  Heaters

Immersion  Heaters

Circulation Heaters

EnergySaver Heater

Accessories

Did You Know?...

As always, remember to remove heating equipment from the water before touching or entering the water.  Although our equipment is safe, common sense indicates the importance of removing the heater first.

BE SAFE WITH ELECTRICITY!

We have available this Leviton 50 Amp 240 V GFCI to attach your baptistry wiring.

Learn More

 

 

CAUTION!

All Heater Products must be protected by a GFCI Breaker before you use them!  This simple procedure will protect your Pastor and Candidates during the Service! Make sure your electrician installs a GFCI breaker.  Some of our heaters have one already installed.

ChurchRite® - Our Circulation Baptistry Heater Products 
 

1.  Poolside Baptistry Water Heater!   ENERGY SAVER!

     Poolside Brochure      Product Manual

 

This new baptistry heater is our most economical to operate! The heater is mounted for easy use and accessibility, then attaches to the 2 15' long garden hoses (included), which then will extend into the pool.  No drilling or plumbing needed! One hose connects to the commercial grade 1/6 HP submersible pump which pumps the water from the pool to the heater, then back again into the pool.  The submersible pump plugs into the back of the heater unit so all are under the protection of the GFCI plug (included with the 120V system - you provide with the 240V system).   PL120 heats PORTABLE BAPTISTRIES up to 150 gallons.  PL240 heats standard size baptistries up to 750 gallons.  The PL240 uses 30% less energy than other circulation systems! No drilling - no plumbing - easy to set up and use!  GFCI included on 120V system only.

Technical Info.  To order, visit a ChurchRite dealer. 

GFCI Recommended for PL240

 

 

2. Basic Circulation Water Heaters - In Line - 240V 

Baptistry Circulation Water Heater

The Basic Circulation Baptistry heaters are another choice in circulation style baptistry heater technology.  Designed to heat full size baptistry (240V) these units have been used by churches for over 50 years!  Once you have set it up, this design is very simple to use, just fill  your baptistry, turn on the power, and turn the thermostat knob until the light comes on. (Be sure heater is in the water before turning on!) The 240V - 6KW unit will raise an average baptistry (500 gallons) by 30 degrees F in 6-8 hours*.   It attaches directly to the side of your baptistry and is plumbed through to the water.  26" tall - requires 25A @ 240V single phase. Water enters at the pump level (bottom), circulates past the element, and releases at the top.  Do not use with chlorine or bromine solutions.   GFCI required (not included) GFCI Recommended    

For larger baptistries, an 11.5W version is available.

Technical Info  To order, visit a ChurchRite dealer. 

3. Deluxe Baptistry Heating and Control System - 240V

Model CR-6000 - 5.5 KW   Product Manual  Model CR-6005 11.5 KW

This is the best system we have to offer! Complete control over every aspect of your baptismal service is available with the Deluxe system.  Available in both 5.5 and 11 KW versions, the Deluxe system is safe and easy to use.  Featuring a built in GFCI breaker (saves electrician costs and wiring),   stainless steel element housing construction, a 1/2 HP pump, and thermostatic controls. All heater fittings come in the box, ready for minor assembly and use. No rust with this system! You can even use light chemical applications in the water!   GFCI included in system.

The 5.5 will heat the average 500 gallon baptistry in 6 hours by 30 degrees F. The 11 KW will heat the same baptistry by 36 degrees F in about 4 hours. Can be installed up to 12 feet from baptistry.  Heating indicator and power lights. Adjustable thermostat. GFCI included.

 

Technical Info         Features         Brochure     In The Box

To order, visit a ChurchRite dealer

Also available are the accessory kits:

#A - Optional  Auto Fill & Water Level Kit -  This kit will fill your baptistry with water, turn off the water at the preset level, then turn on the heater.  Includes Water Level Assembly, Water Fill Assembly,  System Interface Module, 1 Air button and Tubing, 1 Water Level Wall fitting,  1 Water Fill Wall Fitting , 1 Overflow Wall Fitting  

Model 48-0140F-K      More Info   To order, visit a ChurchRite dealer 

# B - Optional  Auto Drain Kit -  Drain the water easily with this accessory. (Note:  Requires that you also purchase Model 48-0140F-K above).  Includes Motorized 1 1/2" 2-way valve, 15' Cord with plug,  2 drain / suction wall fittings  

Model 48-0141-K    More Info   To order, visit a ChurchRite dealer 

# C - Optional  BAPSIDE  Remote Control   - Control temperature, pump and heater from the side of the baptistry. Our Bapside control includes a 25’ power cord and 25’ temp sensor allowing the baptistry to be conveniently operated remotely. The kit includes 3 air buttons and digital Temperature Control / Display. Remote plugs directly into ChurchRite Systems Control Box.

Model 34-0038D25-D       More Info   To order, visit a ChurchRite dealer 


*Exact temperature increase times cannot be given because there are other factors that affect this, such as the initial water temperature, room ambient temperature, and whether you have a baptistry cover on or not.

   

    Home   |  Technical  |  Dealers  | Become a Dealer |  Warranty Registration   | Products | Contact

Copyright © 2010  ChurchRite.com